Buckleys PST-100, Instruction Manual, Page: 6 / 16

Instruction Manual
6
Unpacking
Remove the PST-100 from its packaging and check for damage. If any part is
damaged, the carrier and supplier should be notified immediately.
All packing material should be kept for inspection. The PST-100 should not be used.
The package contains the following items:
• 1 x PST-100 pistol unit
• 1 x Flexible probe
Safety Precautions and Symbols
Caution, risk of danger Caution, risk of shock Category II double
isolation
Earth return (grounding
terminal)
Read the information in this manual carefully before using the equipment.
The PST-100 Spark Tester is intended to generate a high voltage discharge, it is only
to be used by responsible and authorised personnel that have read and
understood this manual.
The probe must
NEVER be directed at the body.
There is a potential risk to those who might have an incipient heart condition.
There is also a potential risk from the reflex action when receiving a high- voltage
shock. Injury could also occur if the spark were discharged to sensitive parts of the
body (e.g. eyes).
Note: The works safety officer should approve the use of this equipment.
IMPORTANT: Service and repair of this product and its components MUST ONLY
be undertaken by trained, approved technicians working in full accordance
with Buckleys’ service guidelines. Failure to do so may expose the operator to
potentially lethal voltages.
Under no circumstances should anyone other than trained approved
technicians attempt to dismantle or repair this product.