PST-100
13
Other Risks
•
Have you checked that there are no ongoing processes in the area (eg
below the roof you’re working on) that may be dangerous – X-ray
machines, other radiation?
•
Are you certain that the instrument has not been immersed, dropped or
otherwise damaged in a way that is not obvious?
•
Have you verified that the ground connection is actually grounded?
•
Is the person responsible for site safety aware of / fully understanding the
testing you are going to do, and has it been reviewed in line with the site
procedures?
Maintenance
The PST-100 has been designed to be maintenance free, however the PST-100
should be inspected regularly, checking for damage to the unit. If any damage is
found, the PST-100 must not be used, and should be returned to the manufacturer
for repair.
Two 500mA anti-surge fuses are located on the rear panel. These may be replaced
by the user. Disconnect the PST-100 from the mains supply before attempting to
replace fuses.
Disposal information
Producer registration number: WEE/HJ0051TQ
This Product must be disposed of in accordance with UK WEEE
Producer Responsibility Regulations, or in accordance with your local
WEEE guidance.
For further information on UK
WEEE
Producer Responsibility
regulations click on:
http://www.gov.uk/government/collections/producer
IMPORTANT:
Service and repair of this product and its components
MUST ONLY
be undertaken by trained, approved technicians working in full accordance
with Buckleys’ service guidelines. Failure to do so may expose the operator to
potentially lethal voltages.
Under no circumstances
should anyone other than trained approved
technicians attempt to dismantle or repair this product.
NOTE:
Wherever you are intending to use equipment of this type, on your site or on a
customer’s, always obtain clearance from the company safety officer.
Summary of Contents for PST-100
Page 2: ......