WARNING: If any of the power head assembly parts should become
detached or broken, exposing motor or any other electrical components,
operation should be discontinued immediately to avoid personal injury or
further damage to the vacuum. This vacuum has no user serviceable parts,
except the filter.
Cleaning
To keep your Wet/Dry Vac looking its
best, clean the outside with a cloth
dampened with warm water and mild
soap.
Storage
Before storing your powerhead, the cord
should be wrapped around the unit to
keep it from getting damaged.
The supply cord cannot be replaced. If
the cord is damaged, the vac should be
destroyed and replaced.
Replacement filters are available where
you purchased your vac. The stock
number is VF2000.
TROUBLESHOOTING
REPLACEMENT FILTER
MAINTENANCE
(continued)
!
Problem
Cause
Remedy
Vac will not pick up dirt
1. Clogged filter
1. Clean or replace filter
(follow instructions on
page 7)
2. Clogged hose
2. Remove hose and
clear debris.
3. Air leak
3. Make sure power
head is securely
attached to bucket and
the bucket is one of the
designated types
Vac will not run
1. No electricity
1. Make sure electrical
outlet has voltage.
(A qualified electrician
may need to be
contacted).
SP6726 BUCKET HEAD 0809 8/26/09 5:04 PM Page 8
