btsr WINDINGFEEDER, Operating Manual

Page: 21 / 47

Technical Data and Installation
WINDINGFEEDER - 2.7 -
Instructions for Correct Yarn Threading
ƒ Thread the yarn inside the lower buckle

, thread it inside the yarn-brake

, then make nn coils around the
roller

, passing beneath the separation element

, as shown on the figure above.
ƒ Set the yarn over the loading cell of TS44 sensor

and thread it out of the upper buckle

.
ƒ
For correct separation of yarn coils on the coil separation element

, slightly tilt the separation device,
while the WINDINGFEEDER is running, turning the adjustment screw

.
ƒ To adjust the yarn-brake pressure, set the adjustment wheel

:
ƒ Push the adjustment wheel towards the yarn-brake to increase the braking effect (+).
ƒ Move away the adjustment from the yarn-brake to decrease the braking effect (-)
+ -