background image

 

Operating Your Computer 

2-12 

Here are some common terms that you should know when using the 
touchpad: 

Term 

Action 

Point 

Move your finger on the pad until the cursor points to the 
selection on the screen. 

Click 

Press and release the left button. 

–or– 

Tap gently anywhere on the pad. 

Double-click 

Press and release the left button twice in quick succession. 

–or– 

Tap twice on the pad rapidly. 

Drag and 
drop 

Press and hold the left button, then move your finger until 
you reach your destination (drag). Finally, release the 
button (drop) when you finish dragging your selection to 
the destination. The object will drop into the new location. 

–or– 

Gently tap twice on the pad and on the second tap, keep 
your finger in contact with the pad. Then, move your 
finger across the pad to drag the selected object to your 
destination. When you lift your finger from the pad, the 
selected object will drop into place. 

Scroll 

To scroll is to move up and down or left and right in the 
working area on the screen. 

To move vertically, place your finger on the right or left 
edge of the pad and slide your finger up and down along 
the edge. To move horizontally, place your finger on the 
top or bottom edge of the pad and slide your finger left and 
right. 

This function works only after you install the touchpad 
driver supplied with the computer and it may not work for 
all applications. 

TABLE NOTE

:

 If you swap the left and right buttons, “tapping” on the touchpad

 

as an alternative method of pressing the left button will no longer be valid. 

Summary of Contents for 18M28































































































































Reviews: