MAINTENANCE AND SAFETY INSTRUCTIONS | PAGE 28 OF 38
4.1.2
PROCEDURE OF WORN-OUT TUBE AND PROJECTILE REPLACEMENT
If the applicator stops working correctly after some amount of time, then it is possible to change the worn-out parts of the tube
and projectile by using the spare parts kit included in the BTL-6000 SWT Topline package.
Do not use damaged applicators! There is a risk of injury to the operating staff or the client.
The spare parts kit includes:
1x exchangeable kit
1x key to screw and unscrew the cartridge screw cap
1x plastic covering for the exchangeable kit
1x set of spare O-rings
Replacement procedure:
1.
Unscrew the screw cap of the shock transmitter by hand.
2.
Remove the shock transmitter and both O-rings from the applicator
O-rings
