INSTRUCTIONS FOR OPERATION | PAGE 19 OF 38
2.9
SAVING THERAPY
A particular operation can selected after pressing the “save” button. Depending on which operation is selected,
a chart with the appropriate data will be shown. An example of the procedure is displayed on the following screens.
It is always possible to save the therapy after setting its parameters, for example from the screen of therapy parameters – see
the chapter Therapy parameters screen. The following information is saved for each shockwave therapy program:
•
Frequency
•
Number of shocks
•
Intensity
To save a therapy, enter:
•
The name of the diagnosis (therapy): This will be displayed in list of diagnosis under the diag button.
•
The program number: This will be displayed among the programs under the prog button.
•
The description and/or additional information: This will be displayed in both lists below the line.
After entering this data, it is possible to assign a unique name to that particular therapy program. The name of the therapy
program will consist of the letter “W” (for shockWave therapy) and a number from 8000 to 8999. The device will automatically
offer the lowest available number in this range or it can be chosen by the user. For example, the resulting program number
could be: “W-8001”
You will find the saved therapy in the list of diagnoses under the name of the user diagnose or in the list of programs under the
number assigned by you (or automatically). If you choose to save therapy with adding it to the client data, the therapy will
display also after selecting the client in the list of his/her assigned therapies.
2.10 USER SETTINGS: THE ‘USER’ BUTTON
By pressing the user button, the menu with options regarding the data saved by the user will be displayed. Additionally, certain
“special" functions of the shockwave generator will be displayed as well:
•
Clients
•
User diagnoses / programs
•
Recent therapies
