INSTRUCTIONS FOR OPERATION | PAGE 17 OF 38
2.7.2
RUNNING THERAPY SCREEN
2.7.3
END OF THERAPY / GENERATION OF SHOCKS
Normally, therapy ends after application of the preset number of shocks. However, it is possible to end or interrupt (pause) the
therapy before it has finished running. To interrupt therapy, press start/stop key on the front panel of the device or press the
button on the applicator. To end therapy, simply press esc.
The generation of shocks will stop when the preset number of shocks have been applied. It is also possible to terminate their
generation by releasing (in continual mode) or pressing the button of the applicator again (in the ON /OFF mode).
For more information, see the section Shockwave setting: Applicator button mode.
2.8
APPLICATION OF SHOCKWAVES
Application of shockwaves is provided via a spring-loaded applicator, which:
•
Provides proper and exactly specified contact of the applicator with the treated tissue during therapy.
•
Minimizes the transmission of reverse shocks to the hand of the therapist due to the built-in air damper
An integral part of the applicator is the ergonomic hand rest (13) which provides a comfortable grip and prevents unwanted
slippage of the hand during therapy. The ergonomic hand rest swivels and can be set into the desired position at any time.
The ergonomically-shaped handle allows the therapist to grip the applicator comfortably in various different positions. The
orientation can be varied according to the type of applied therapy and the personal preferences of the therapist whether they are
left-handed/right-handed or male/female.
The ergonomic shape of the handle offers the therapist sufficient support during the application. This reduces the tiring of the
therapist hands during the course of therapy.
Name of selected therapy /
program and the set parameters
Set intensity
Number of applied shocks
Set number of shocks
Set frequency
Number of remaining shocks
Time of applied therapy
Icon and name of connected
accessories
Symbolic description of
generated output
