MAINTENANCE AND SAFETY INSTRUCTIONS | PAGE 38 OF 47
This operation can be accomplished only by person familiarized with this procedure!
If in doubt contact the authorised BTL customer service. The manufacturer is not responsible for any damage
incurred by incorrect switchover.
Transport and storage
We recommend retaining the original packaging of the device to ensure its maximum protection during
transportation. Disconnect the mains cables and the accessories cables. Avoid heavy shocks. The device must
be stored or transported under the conditions defined in the chapter
Technical parameters
.
7.1.1
SHOCK TRANSMITTER REPLACEMENT PROCEDURE
The shock transmitter (
14
) can be replaced by another one as necessary; three shock transmitters are the part of
the BTL - 5000 SWT standard accessories:
•
1x replaceable multi-focus shock transmitter Ø 15mm
•
1x replaceable multi-focus shock transmitter Ø 9mm
•
1x replaceable focusing shock transmitter Ø 15mm
Replacement procedure:
1. Unscrew the screw cap of the shock transmitter by hand (
15
).
2. Remove the shock transmitter from the applicator (
14
) (including both O - rings).
3. Insert the selected shock transmitter „as it is" to the applicator (including the mounted O - rings).
4. Put the shock transmitter's screw cap of the applicator back on and screw it tightly by hand (
15
).
O-rings
