![background image](http://html1.mh-extra.com/html/bticino/multiplexer-16/multiplexer-16_instructions-for-use-manual_2825453014.webp)
14
Multiplexer 16
(6)
seq
and
pgdn
PUSH BUTTON
a. In full screen mode for single camera:
Press SEQ to activate the AUTOMATIC sequential switching function.
This activates the sequential switching of the connected cameras programmed in
the Menu. The scanning will be performed with the time intervals predetermined
when the individual cameras were programmed. To deactivate the sequential
switching press SEQ again or press a camera push button.
b. In PIP (picture in picture) mode:
The cameras programmed in the PIP sequence
can be displayed with the sequential switching programmed in the Menu.
c. In quad picture (QUAD) mode:
The cameras not yet shown can be displayed in
sequential switching function in the lower right.
d. In 3x3 mode:
The cameras not yet shown can be displayed in sequential
switching function in the lower right.
e. In 4x4 mode:
The cameras not yet shown can be displayed in sequential
switching function in the lower right.
f. In the Programming menu “options” mode
Press this push button to select the previous page.
(7)
sel - end
PUSH BUTTON
Use this push button in the Programming menu to:
a. Select the cameras to be displayed in each screen window.
b. Quit the menu.
(8)
freeze
PUSH BUTTON
a. In the full screen mode during playback:
on pressing this push button the LED
lights up and the current picture can be frozen.
b. In PIP mode during playback:
on pressing this push button the LED lights up
and the freeze function is available for the camera required. Pressing the channel
one push button freezes the background picture and pressing the channel two
push button freezes the camera in the small frame.
c. Quad picture with full screen mode during playback:
on pressing this push
button the LED lights up and the freeze function is available for the camera
required. Pressing the channel one push button freezes the first camera; press
the channel two push button to freeze the second camera, the rest takes place
automatically.
d. In 3x3 or 4x4 mode during playback:
performs the same procedure as in point C.
e. On pressing this push button again
the LED goes out and releases the frozen
picture returning to live view.
(9) CAMERA PUSH BUTTONS from
1
to
16
:
On pressing one of these numbered push buttons from 1 to 16 the LED
corresponding to each camera will light up, this allows selection of the full-screen
view of the camera selected both for direct monitoring and to reproduce the
camera on the recorded cassette.