12
Multiplexer 16
PRODUCT FEATURES
• Using the most advanced technologies currently available the new series of 16-input
multiplexers can satisfy the most demanding quality requirements, both in LIVE
monitoring and in VCR playback of the pictures connected to it.
• Supplied in Full duplex version it can simultaneously display and record all the
connected cameras using 2 VCR.
• Possibility of full-frame recording for all the pictures connected to a single VCR,
while at the same time they are displayed on a LIVE monitor.
• For perfect synchronising of the recording it can be set by means of a programming
menu or with a trigger signal which can be connected to the connector on the back.
• Each video input can be adjusted from the menu (impedance; brightness; contrast;
colour; tint). If B/W cameras are connected the colour and tint cannot be adjusted.
• Possibility of 16-camera display; PIP; single camera with full screen. In PIP mode
the camera is positioned in the small frame (1/4 screen) and can be positioned
where you wish on the main picture. Any camera can be displayed in PIP mode,
it is programmed in the programming menu.
• When playing from VCR all the formats required; PIP; single picture etc. can be
displayed.
• It can connect 3 monitors for very flexible management of the LIVE and Recorded
pictures.
• It can set the camera looping in High impedance instead of 75 Ohm by programming
in the product menu.
• Date and time generator; character generator for camera titling (max 8 letters).
• OSD menu for easier programming.
• It can be computer controlled via RS232 port.
• It can have 100 alarm recordings with indication of date and time.
• Possibility of automatic alarm detection by sensor and video loss with two different
sounds.