62
By pushing the “measure”
button in the main menu it’s possible to enter the
following page:
7. Measure menu
“Current” button shows the measured currents for each phase, neutral and earth fault
(if present).
“Voltage” button shows the measured voltage. Line voltages and phase voltages
are shown.
“Power” * button shows the measured power, both three-phases or mono-phase system.
By pushing the “energy” * button it’s possible to open the energy sub-menus.
“Harmonics” button allows to display harmonics measures for both currents and voltages.
“Other” button shows the measured frequency (f), three-phase power factor (PF*), and
internal temperature (T) of the protection unit.
“Current”
“Voltage”
“Other”
“Energy”
“Power”
“Harmonics”
* Values shown depends on the current direction (see chapter 7).
