25
• Communication Protocol Setup
• Select an appropriate Protocol with the DIP switch combination.
Switch State
Protocol
P0
(Pin 1)
P1
(Pin 2)
P2
(Pin 3)
OFF
OFF
OFF
PELCO-D, 2400 bps
ON
OFF
OFF
PELCO-D, 9600 bps
OFF
ON
OFF
PELCO-P, 4800 bps
ON
ON
OFF
PELCO-P, 9600 bps
Otherwise
Reserved
• If you want to control using DVR or P/T controller, their protocol must be identical to camera. Otherwise, you can not
control the camera.
• If you changed camera protocol by changing DIP S/W, the change will be effective after you reboot the camera.
• Factory default of protocol is “Pelco-D, 2400 bps”.
• If you want to use Alarm Input, the types of sensor must be selected. The sensor types are Normal Open and Normal.
Normal Open
Output Voltage is high state when sensor is activated.
Normal Close
Output Voltage is high state when sensor is not activated.
• Sensor type sensor
• If you want to use Alarm Input, the types of sensor must be selected. The sensor types are Normal Open and Normal.
Pin No
Switch State
Sensor type
ST1 (Pin 4)
ON
Sensor 1 : Normal Close Type
OFF
Sensor 1 : Normal Open Type
ST2 (Pin 5)
ON
Sensor 2 : Normal Close Type
OFF
Sensor 2 : Normal Open Type
ST3 (Pin 6)
ON
Sensor 3 : Normal Close Type
OFF
Sensor 3 : Normal Open Type
ST4 (Pin 7)
ON
Sensor 4 : Normal Close Type
OFF
Sensor 4 : Normal Open Type
Summary of Contents for LE03110AA
Page 21: ...21 PACKAGE COMPONENT Product Accessories Optional...
Page 36: ......