Bticino 391 515, Quick Start Manual

Page: 29 / 62

29
LAN recorder 4/8/16 cameras
Q
uick S
tar
t Guide
Item Description
1 VIDEO INPUTS 8x or 16x BNC inputs for connecting analogue cameras.
2 AUDIO INPUTS RCA inputs for the audio signal.
3 NETWORK CONNECTION Connection to the LAN, RJ45 connector.
4 VGA OUTPUT Output for a VGA monitor.
5 POWER SUPPLY 12 VDC input.
6 VIDEO/SPOT OUTPUT BNC output for an analogue monitor, for sequential display of cameras.
7 AUDIO OUTPUTS RCA outputs for an audio signal.
8 USB USB port for connecting a peripheral (mouse, external hard disk, USB key).
9 RS485/RELAY/SENSOR
Male SUB-D (DB25) connector, inputs and outputs for connecting PTZ cameras,
relays and alarms (see section 2.5 for the connections).
10 ON/OFF button Electricity supply button.
11 NTSC/PAL NTSC/PAL switch. In Europe leave the switch in PAL position.
12 IR Connector for an IR sensor extension.
13 E-SATA Connector for an E-SATA external hard disk.
16-channel recorder
2.4 391 516/391 517 Rear Panel
1 CAMERA 1-16
6 VIDEO/SPOT OUTPUT
7 AUDIO OUTPUT
8 USB
OUTPUT
4
VGA OUTPUT
3
NETWORK
CONNECTION
9 RS485/RELAY/SENSOR
2 AUDIO
INPUT
B NTSC/PAL
A ON/OFF BUTTON
5
POWER
SUPPLY
D
E-SATA
C IR
2 AUDIO
INPUT
3
NETWORK
CONNECTION
4 VGA OUTPUT
5 POWER SUPPLY
6 VIDEO/SPOT OUTPUT
8 USB
OUTPUT
7 AUDIO OUTPUT
9 RS485/RELAY/SENSOR
1 CAMERA 1-8
8-channel recorder
Note: Once the video output is set up in “Spot” mode,
it is no longer possible to use the screen to disable this
function. An additional screen must be connected to the
VGA output.