background image

24

PREFACE

In order to guarantee your safety and a correct functioning, be sure to follow these safety warnings. The whole 

set (with cables included) must be installed in a place lacking of or distant from:

• 

Dust, humidity, high temperatures and direct exposure to sunlight.

• 

Heat irradiating objects, which may damage your device or cause any other problem.

• 

Objects producing a high electromagnetic field (Hi-Fi speakers, etc.).

• 

Corrosive liquids or chemical substances.

ENVIRONMENTAL CONDITIONS

Environment temperature: from 0 °C to +45 °C 

Relative humidity: from 20 to 80 % n.c.

Any sudden change in temperature and humidity must be avoided.

CLEANING INFORMATION

Use a soft dry cloth and avoid any solvents or abrasive materials.

SHOCKS OR VIBRATIONS

Caution against shocks or vibrations.

BACKUP BATTERY

WARNING: this device is supplied with a backup battery.

This battery may get burnt, explode or cause serious burnings. DO NOT disassemble, weld, burn or throw the 

battery into water. Keep out of children. Replace only with a same model battery and reserve the operation 

only to qualified staff.  The use of a different battery may cause fire hazard or explosions. Italian laws consider 

batteries as dangerous urban waste that must be disposed according to the law provisions in force (Italian DPR 

915/82 and local provisions).

The backup battery is excluded from warranty.

DECLARATION 

 of CONFORMITY

We, BTicino SpA registered office at:  via Messina 38 - 20154 Milano (Italy) declare under our sole responsability 

that the product with name BT-3489GSM Type: Modem Quad-Band 850/900/1800/1900 MHz, Category: Device 

for the Information Technology satisfies the basic requirement of the below indicated Directive:

1999/5/EC  9th  March  1999,  R&TTE  (concerning  radio  equipment  and  telecommunication  terminal 

equipment and the acknowledgment of their conformity) Law Decree 9th May 2001, n.269, (G.U. n. 156 of 

7-7-2001).

Directive 2009/125/EC OF of 21 October 2009, ERP, establishing a framework for the setting of ecodesign 

requirements for energy-related products. EC Regulations n° 278/2009 and n° 1275/2008

 

As indicated in conformity with the requirements of following Reference Standards or of other regulations 

documents:

 

EN 301 489-1  EN 301 489-7 

EN 301 511  EN 55022 

EN 55024

 

EN 62311 

EN 60950-1

SAFETY WARNINGS

Read these instructions and norms carefully before powering the device. Violation of such norms may be illegal 

and cause hazard situations.

For any of the described situations please refer to the  specific instructions and norms.

The device is a low power radio transmitter and receiver. When it is ON, it sends and receives radio frequency 

(RF) signals.

Summary of Contents for 3489GSM
























Reviews: