BTI 9090123, Original Operating Instructions

Page: 16 / 20

16 | English
Use riveter, accessories, attachments, etc. only as
described in these instructions. Give consideration to
the working conditions and the work to be carried out.
The use of riveters for other than the intended applica-
tions can lead to dangerous situations.
OPERATION AND HANDLING OF THE
BATTERY
Charge the batteries (F) only in chargers
recommended by the manufacturer. There is
a risk of fire if a charger designed for a given
type of battery is used with other batteries.
Use only the specified batteries in the riveters. The
use of other batteries can lead to injuries and the
risk of fire.
Keep battery (F) not in use away from paper clips,
coins, keys, nails, screws or other small metal
objects that could cause bridging of the contacts. A
short circuit between the battery contact can cause
burns or a fire.
If improperly used or damaged, liquid can escape
from the battery (F).
Avoid contact with this liquid. In the event of acci-
dental contact, wash off with water. If the liquid gets
into the eyes, obtain additional medical assistance.
Escaping battery liquid can cause skin irritation or
burns.
SERVICE
Have your riveter repaired only by qualified
specialist personnel and only with original
spare parts. This will ensure that the safety
of the riveter is maintained.
TECHNICAL DATA
Blind rivet working range
[Ø mm]
2.4 - 5.0
Max. mandrel diameter
[mm]
3.4
Riveter weight incl. battery
[kg]
1.8
Total stroke [mm] 21
Drive DC
Tensile force [N] 10,000
Sound emissions LpA / K //
LWA / K [dB]
<65 / 3 // <76 / 3
Vibrations ah / K [m/s²] < 2.5 / 1.5
Service interval [number of
rivets]
100,000
Battery [V] 14.4
Battery [Ah] 2.0
Battery cells [number] 4
Battery weight [kg] 0.32
Battery working temperature
[°C]
-5 to 45
Charger input voltage
[V AC / Hz]
100 to 240 / 50
to 60
Charger output voltage
[V DC]
7.0 to 21.0
Charger output current [Ah] 4
Charger working tempera-
ture [°C]
0 to 40
Charger charging time to
90 % / 100 % [min]
22 / 30
Charger weight without
cable [kg]
0.55
COMMISSIONING
CHARGING THE BATTERY
Note: The battery (F) is partially charged on delivery.
In order to ensure the full performance of the battery
(F), charge the battery (F) completely in the charger
before the first use. Observe the notes on the state of
charge on the charger. The Li-Ion battery (F) can be re-
charged at any time without shortening its service life.
Interruption of the charging cycle does not damage
the battery (F). The charger is equipped with a temper-
ature monitoring device that permits charging only in
the temperature range between 0 °C and 40 °C.
PREPARING THE CORDLESS RIVETER
14.4 V 2,0 AH
Fit the mandrel collecting container (E) by turning
to the right. Push the battery (F) into the foot of the
riveter from the front and ensure that the battery (F)
is properly engaged. Press the trigger (I) and hold it
depressed. Fit the appropriate nose piece (A) for the
rivet you wish to set using the combination wrench
supplied. After changing the nose piece, release the
trigger.