BTEK HRB, Installation Instructions Manual

Page: 8 / 20

8 HRB Bench Scale Installation Instructions
Introduction and installation
2.1 Unpacking and installation
Unpack the scale and check for any damage. Report damage to the shipping company
immediately.
2.1.1 Removing the shipping stops
Four colored shipping stops are installed under the platter of the 35 and 80kg HRB
scales at the factory. Before you begin weighing, be sure to remove these stops. Refer
to
Figure 2.2 .
Figure 2.2 Removing the shipping stops
Repeat these steps on all four corners. Save and re-use if shipping the scale becomes
necessary in the future.
The 1 and 5kg scales come with tubes taped in place under the scale platter. Remove
the tape and tubes before using.
Shipping stops shown taped in place.
Slide the stop down and
remove it from the slot. Keep
for future shipping.
Remove the tape and
slide the stop to the
nearest slot in the base
(pointed out in the photo
above).