VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
55
SFT-D and OFFSET only function in VFO mode.
MR mode uses and stores the RX frequency and the TX frequency directly (see Chapter 4)
The following instructions assume that you know what transmit and receive frequencies your
repeater employs, and that you're authorized to use it.
1.
Set the radio to Frequency (VFO) mode with the
key.
2.
Enter the repeater’s output (your receiving) frequency by either using the
and
keys, or by entering it directly on the numerical keypad.
3.
Press the
key to enter the menu.
4.
Enter Menu 47 to get to frequency offset.
5.
Press
key to select.
6.
Use the
and
keys and the numerical keypad to enter the specified frequency offset.
See the section called “26 OFFSET - Frequency shift amount” for details.
7.
Press
to confirm and save.
8.
Enter Menu 46 on the numeric keypad to get to offset direction.
9.
Use the
and
keys to (positive) or - (negative) offset.
10.
Press
to confirm and save.
Summary of Contents for UV-25X2
