BTECH UV-25X2, User Manual

Page: 46 / 83

VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP 39
Master ID station must first identify and send the PTTID (set in software as “Master ID”) – once the
Master Station identifies itself, the radio is set to receive command tones, if the Monitor Remote
Kill tone is received - the radio will revived from a stun/kill command.
Both the master ID station
and remote stun signal must be set up in software.
Read More About Remote Commands
A In-Depth downloadable PDF is available at: www.baofengtech.com/support which details Remote
commands and how to use them. This Document Explains with examples on how DTMF remote
commands are used
DTMF Receive Settings, Transmit Setting (Call Key)
1. Press [MENU] Key select 18 OPTSIG, press [F] Key select DTMF function.
2. Press [MENU] Key select 22 S-INFO, press [F] Key select pre-code signal group (1-15). (The
DTMF Signal must be saved first in the PC software setting under DTMF settings.
3.
If properly set up (on Menu 18 and 19), your radio will open the squelch when it receives
the required DTMG signal.
4.
Press [Call] Key to send the same DTMF you have selected in Menu 22.
2TONE Receive Settings, Transmit Setting (Call Key)