BTECH UV-25X2, User Manual

Page: 32 / 83

VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP 25
will release the auto lock.
5. [Enter Menu]+ [5] : TOT - transmission time-out timer. Sets the maximum transmit time
from 15 to 600 seconds (15 second steps).
6. [Enter Menu]+ [6] : APO – Auto Power Off powers off the radio after a predetermined time
with no receiver activity. (30 > 300 minutes)
7. [Enter Menu]+ [7] : WN - WIDE or NARROW band width settings (12.5/25khz).
8. [Enter Menu]+ [8] : ABR – Unused Setting
9. [Enter Menu]+ [9] : BEEP - turns key beeps OFF or ON.
10. [Enter Menu]+ [1] + [0] : R-DCS - DCS receive/squelch settings. Options include the D023N-
D754N positive sequence and the D023I- D754I reversed sequence.
11. [Enter Menu]+ [1] + [1] : R-CTCS - CTCSS receive/squelch settings. Selectable from 67.0HZ-
254.1HZ. you can use the keypad to quickly enter in the desired setting
12. [Enter Menu]+ [1] + [2] : T-DCS - DCS transmit settings. Options include the D023N-D754N
positive sequence and the D023I- D754I reversed sequence.
13. [Enter Menu]+ [1] + [3] : T-CTCS CTCSS transmit settings. Selectable from 67.0HZ-254.1HZ.
you can use the keypad to quickly enter in the desired setting
14. [Enter Menu]+ [1] + [4] : DTMFST – DTMF transmit tone settings.
OFF : No tones heard through the speaker when transmitting. KEY : Only manually keyed
DTMF codes are heard. ANI : Only automatically keyed DTMF codes are heard. BOTH : All
DTMF codes are heard.
15. [Enter Menu]+ [1] + [5] : BCL - busy channel lock- out. If you have this turned on the