BTech DMR-6X2 CodePlug Programming Guide
V-1.00/1.00
Page 14 of 30
©
2017/8
Trygve Svärd KD0PNQ
Power Save
Auto Shutdown
Select Off or minutes before auto shut-down
Power Save
Select Off or 1:1 or 2:1 for saving power
Key Function
Key Lock
Select Manual or Auto key lock function
PF1 Short Key
Select from function list for the radio key below PTT
PF2 Short Key
Select from function list for the radio key 2 below PTT
PF3 Short Key
Select from function list for the orange radio key
P1 Short Key
Select from function list for the P1 radio key
P2 Short Key
Select from function list for the P2 radio key
PF1 Long Key
Select from function list for the radio key below PTT
PF2 Long Key
Select from function list for the radio key 2 below PTT
PF3 Long Key
Select from function list for the orange radio key
P1 Long Key
Select from function list for the P1 radio key
P2 Long Key
Select from function list for the P2 radio key
Long Key Time
Select time in seconds to hold the key for Long duration
Other
TOT
Tx Time Out Timer. Off, 30s, 60s > 240s
Frequency Step
In VFO mode, selects the frequency steps
Language
English
SQL Level A
Squelch level for the “upper” channel – set at 1
SQL Level B
Squelch level for the “lower” channel – set at 1
TBST
Tone Burst - 1000, 1450, 1750, 2100Hz repeaters
PTT + PF1 key to send tone!
Select TX Contact
When On, the radio DMR ID can be changed from keyboard
Analog Call Hold Time
Select how long a call is held for Analog reception.
Call Channel maintained Off / On - Allows a transmit on the sub-channel B if done
within 5 seconds after the call carrier was dropped.
Show Last Call on Launch Off / On
Priority Zone A
Select Off or the zone that should become priority
Priority Zone B
Select Off or the zone that should become priority
Digital Functions
Group Call Hold Time
Select hang time for a Group Call
Personal Call Hold Time
Select hang time for a Private Call
Prewave Time
Select the time to wake-up the radio from a power save
