![background image](http://html.mh-extra.com/html/bt/w52p/w52p_user-manual_2824438004.webp)
4
Connecting the base station.
PHONE INSTALLATION.
There are two options for power and network connection of the base station. Your
system administrator will let you know which one to use.
AC power
To connect the AC power you need to:
1. Connect the DC plug on the power adapter to the DC5V port on the base station
then connect the other end of the power adapter into an electrical power outlet.
2. Connect the Ethernet cable (included) between the Internet port on the base
station and the one in your network or the switch/hub device port.
Power over Ethernet (PoE)
Using the Ethernet cable (included), you can power your base station from a PoE-
compliant (IEEE 802.3af) switch or hub.
Simply connect the Ethernet cable between the Internet port on the base station and
an available port on the in-line power switch/hub.
Note:
If in-line power is provided, you
don’t need to connect the AC
adapter. Make sure the switch/hub
is PoE compliant.
Important! Don’t remove the
power and network supplying the
base station while it is updating
firmware and configurations.