Synergy 3000 handset & charger ~ 4th Edition ~ 7th October ’02 ~ 4459
31
Help
Replacing the handset batteries.
After a time, you may find that the handset
batteries are running out of charge more
quickly. This is a standard sign of wear and
the batteries will need replacing.
For spare 2 x AAA rechargeable batteries
(Ni-MH) please contact the Synergy Helpline
08706 058 047
.
Do not immerse the batteries in water or
throw into a fire, or dispose of with ordinary
domestic refuse.
BT accepts no responsibility for damage
caused to your Synergy handset by using any
other type of batteries.
No display appears.
The batteries may be flat or dead. Recharge
or replace the batteries.
The handset may be switched off.
No dial tone.
Is the telephone line cord plugged into the
phone socket?
Check that:
The base station is connected to
the mains power and switched on.
You cannot link up with the base station.
Is the display flashing
?
The mains power cable may not be connected
at the base or switched on.
Are you in range of the base station?
The batteries could be low or flat.
If using more than one base station, check
that you are connected to the correct base.
Handset does not ring.
The ringer volume may be switched to off.
To adjust the ringer volume on the handset.
See page 26
.
Replacing the batteries
In the event that you should need to change or
replace the batteries: Remove the battery compartment
cover and take out the batteries. Insert new
2 x AAA re-chargeable batteries (Ni-MH) and
replace the battery compartment cover.
HELP
