BT STRATUS 1500 User Manual Download

Page: 18 / 64

If you experience any problems, please call the Helpline on Freephone 0808 100 6556* or visit www.bt.com/producthelp

Using the phone

WARNING

If the keypad is locked you will be able to dial the

emergency numbers 999 and 112.
When the keypad is locked you can still answer

incoming calls and operate the handset as

normal. When the call is ended, the keypad lock

comes on again.

Delete a redial number

1. Press

2. Scroll

to the number you want.

3. Press

SeleCt

, then when the entry is selected, press

and scroll

Delete

and press

SeleCt

, then press

4. Press

BACk

to return to the previous menu level.

Delete entire redial list

1. Press

2. Press

SeleCt

on any entry, then press

and scroll to

Delete

All

and

press

SeleCt

Delete

All?

is displayed

3. Press

to confirm or

BACk

to cancel.

4. Press

BACk

to exit and return to standby.

Keypad lock

To lock the keypad

1. Press and hold

until the display shows

keypAD loCkeD

To unlock the keypad

2. Press and hold

to unlock the keypad.

Find handset (Paging)

You can ring a handset to help locate it.

1. Press

on the base. All handsets registered to the base will ring.

The display shows

pAging

and the

icon flashes.

2. Press

on the base again to stop the ringing or press any button on

any handset.

Paging calls only ring the handsets, they cannot

be answered as a voice call.

Press

Silent

to stop a particular handset

ringing. Other handsets will still ring if you

have multiple handsets so this could help you

find them.

Summary of Contents for STRATUS 1500

































































Search results

Summary of Contents for STRATUS 1500

Reviews:

Related manuals for STRATUS 1500

Brands by name

Popular brands

BT STRATUS 1500, User Manual

Search results

Summary of Contents for STRATUS 1500

Reviews:

Related manuals for STRATUS 1500

Brands by name

Popular brands