BT RESPONSE 5, User Manual

Page: 9 / 24

Using your Response 5
8
Switching the answering
machine on and off
To switch on
•
Press and release the
ANSWER
ON/OFF
button, your Response 5
will beep and the red LED will
come on.
To switch off
•
Press and release the
ANSWER
ON/OFF
button. Your Response 5
will beep before resetting the tape.
The red
LED
goes out and then
your Response 5 is switched off.
Outgoing message
The outgoing message is the message
a caller hears when your Response 5
answers a call. It is supplied with
the following pre-recorded outgoing
message:
‘Hello. Your call cannot be
taken at the moment, so please leave
your message after the tone’.
This
message can be kept as your
outgoing message, or if you prefer,
you can replace it by recording
your own message.
To record your own outgoing
message
•
Press and hold down the
OGM
button for about 10 seconds, until
you hear a long beep.
•
Then release the
OGM
button.
•
Record your message – from 5
to 30 seconds long. Speak clearly,
about 15-30 cm from the
microphone.
•
Press the
SAVE/STOP
button to
end recording. Your Response 5
will automatically rewind and play
the message back to you.
The machine is now ON and ready
to take messages.
ANSWER
ON/OFF
ANSWER
ON/OFF
Turning your Response 5 off does not
delete messages. They will be saved for
playback at a later time.
Please note
Once you have recorded over the
pre-recorded message it is permanently
erased and you will not be able to
return to it.
OGM
Your outgoing message can be up to 30
seconds long.
Please note
Remember to end the recording by
pressing the
SAVE/STOP
button.