BT RESPONSE 5, User Manual

Page: 15 / 24

To access your Response 5 to play
back messages
•
Ring your Response 5 as normal.
You will hear your outgoing
message, melody and beep.
•
Enter your security code, holding
it down for 3 seconds.
If there are no messages
•
You will hear four quick beeps,
enabling you to hang up without
incurring extra call charges.
If you have messages
•
You will hear two rings followed
by a melody while the tape is
rewinding.
•
Your messages are played back.
To save messages
•
At the end of playback, you hear
two quick beeps.
•
Enter your security code, holding
it down for 3 seconds. You will
hear two short beeps.
•
Hang up. Your messages are
saved and any new messages will
be recorded after them.
To replay your messages
•
At the end of playback, you hear
two quick beeps.
•
Enter your security code, holding
it down for 3 seconds. You will
hear two short beeps.
•
Enter your security code again,
holding it down for 3 seconds.
Your machine plays a melody
while rewinding. Your messages
are then replayed.
At the end of playback, you can
repeat these steps. If you hang up,
your Response 5 will reset to record
messages.
During playback, your Response 5 will
pause after about 3 minutes. You will
hear 2 short beeps. If you wish to
continue playing your messages, enter
your security code WITHIN 5
SECONDS of hearing the beeps,
holding it down for 3 seconds. If you do
not, your Response 5 will hang up and
rewind to the beginning of the
messages. Remember, your code must
be held down for 3 seconds. The beeps
indicate a pause and will be repeated
every 3 minutes throughout the call
until the end of the messages.
Additional features
14