Selecting the answering
machine mode
To use the pre-recorded
outgoing message
When your answering machine is switched on,
the pre-recorded message will automatically
greet callers with:
“Hello, your call cannot be taken at the moment,
so please leave your message after the tone.”
Callers can skip this message by pressing the
#
button and record their message after the tone.
The pre-recorded message remains in the memory
and you can always choose to use it again.
Default for Answer Only Outgoing Message.
”Hello, your call cannot be taken and you cannot
leave a message. So please call later.“
13
Paragon 200 Plus ~ 4th Edition ~ 25.02.03 ~ 4983
Using the answering machine
To switch the answering machine on,
off and to Answer Only
To set to any of the above settings press
and
release
the Answer On/Off button until the
prompt announces your required setting.
NB:
You will not lose messages when switching
between these settings.
Press
and release
until the display
shows
OGM
.
Default is played.
Press either button
during
playback to
switch between a male or female voice
for your OGM.
Sel
memo
Play
Setting
Description
Display
On
Receives incoming
Number of
calls and records
messages eg.
messages.
00
or
01
etc.
Off
Does not record
Off
messages.
Answer Only
Will play your
AO
outgoing message
but will not record
messages.
ANS
WER
MA
CHINE
To listen to and switch between the male
and female pre-recorded Out Going
Message (OGM)
