16
Paragon 200 Plus ~ 4th Edition ~ 25.02.03 ~ 4983
To use Call Screening
You can let your Paragon 200 Plus
answer a call and have the loudspeaker
switched on so you can hear the caller.
This gives you the option of picking up
the handset and speaking to them or
letting them leave a message.
Please note that the caller’s voice will
not be heard on the lowest level.
While the Paragon 200 Plus is
answering a call or while idle.
Adjust the loudspeaker volume.
The level is shown at the bottom of
the display.
Vol
To use Caller Return (Auto 1471)
Caller Return automatically dials 1471 after a
caller has left a message on your answering
machine and records the announcement giving
the telephone number (if available) and the time
of the call. So even if a caller chooses not to
leave a message, you may still have their
telephone number recorded.
Press
and release
until the display
shows
1471
.
Switches between ON and OFF.
Prompt will confirm the setting
displayed.
While the Caller Return setting is
switched ON, the display shows
1471
.
Sel
OK
OK
Press buttons in the order shown
During playback:
Adjust the loudspeaker volume.
The level is shown at the bottom of
the display.
Vol
Using Remote Access
You can switch on your answering machine from
another phone and, providing you are using a
TouchTone
TM
phone, play back your messages
and memos.
ANS
WER
MA
CHINE
The pre-set code is
0000
.
To switch on Caller Return
Note
Please not that the answering machine takes a
recording from 1471, it is not possible to have
the correct date on each message.
To adjust the answering machine
playback volume
