BT In Touch 2000c ~ 3rd Edition ~ 28th July ’03 ~ 5422
7
RINGER
R1
R2
R3
RINGER
VOLUME
HI
LOW
OFF
4
Select ringer volume
The ringer volume switch is on the underside of
your phone.
Set the volume of the ringer to High, Low
or Off.
This should be done before you attach the base
stand for either raised or wall-mounted positions.
5
Select ringer tone
The ringer tone switch is on the underside of your
phone.
This switch allows you to select the pitch required
for the ringer.
R1: for a low-pitched tone
R2: for a medium-pitched tone
R3: for a high-pitched tone
This should be done before you attach the base stand
for raised or wall-mounted positions.
6
Connect the power cable
Plug the power cable into the socket on the
underside of your BT In Touch 2000c as shown.
The cable needs to be pressed in to its channel
to keep it out of the way. The way you do this
will depend on how you have positioned your phone
(with or without the base stand, wall-mounted or
not). See
‘Desk and wall-mounted phone positions’
on page 24.
All manuals and user guides at all-guides.com
