BT In Touch 2000c ~ 3rd Edition ~ 28th July ’03 ~ 5422
25
1
2
WALL
WALL PLUG
SCREW
Insert the base stand into the holes in the base of
your phone marked ‘RAISED’. You may need to push
quite hard to fix it securely.
Wall-mounted
Your BT In Touch 2000c can be wall-mounted using
the screws and wall plugs provided.
Use the base stand provided as a template to pencil on
the wall where the drill holes should go.
Drill the holes (diameter 5.5mm) for the screws.
Insert the wall plugs provided (if required).
Drive the screws into the wall, leaving about 5mm
free on which to hang the phone.
Press all the cables coming from the BT In Touch
2000c into their guides on the underside of the unit,
as shown below.
Please note
Before you wall-mount your BT In Touch 2000c
check that:
The wall can support the weight of the phone.
The position you choose leaves sufficient space so
that the phone is clear of any obstruction on the
wall, such as a shelf or a cupboard.
The power cable and telephone line cord will reach
their correct wall points.
All manuals and user guides at all-guides.com
