BT Graphite 1500 Page 51 User Manual Download

Page: 51 / 54

Guarantee

Your BT Graphite 1500 is guaranteed for a period of

12 months from the date of purchase.
Subject to the terms listed below, the guarantee will

provide for the repair of, or at BT’s or its agent’s

discretion, the option to replace the BT Graphite 1500

or any component thereof, (other than batteries),

which is identified as faulty or below standard, or as a

result of inferior workmanship or materials. Products

over 28 days old from the date of purchase may be

replaced with a refurbished or repaired product.

The conditions of this guarantee are:

• The guarantee shall only apply to defects that occur

within the 12 month guarantee period.

• Proof of purchase is provided.
• The equipment is returned to BT or its agent as

instructed.

• This guarantee does not cover any faults or defects

caused by accidents, misuse, fair wear and tear,

neglect, tampering with the equipment, or any

attempt at adjustment or repair other than through

approved agents.

• This guarantee does not affect your statutory rights.

Within the 12 month guarantee period:

Prior to returning your product, please read the Help

section beginning on page 46 or contact them on

0870 242 6652* for assistance. In the unlikely event

of a defect occurring, please follow the Helpline’s

instructions for replacement or repair.

Outside of the 12 month guarantee period:

If your product needs repair after the guarantee

period has ended, the repair must meet the approval

requirements for connection to the telephone

network.
We recommend that you contact BT’s approved repair

agent Helpdesk Solutions on 0870 240 5029* or a

local qualified repairer.

Returning your phone

If the Helpline is unable to remedy your problem they

will ask you to return the product. Where possible,

pack the product in its original packaging. Please

remember to include all parts, including the line cords,

power supply units and the original batteries. (Please

note that we cannot take responsibility for goods

damaged in transit.) Please obtain and keep proof of

posting from the Post Office.

General information

If you experience any problems, please call the Helpline on

0870 242 6652*

Summary of Contents for Graphite 1500























































Search results

Summary of Contents for Graphite 1500

Reviews:

Related manuals for Graphite 1500

Brands by name

Popular brands

BT Graphite 1500, User Manual

Search results

Summary of Contents for Graphite 1500

Reviews:

Related manuals for Graphite 1500

Brands by name

Popular brands