Diverse 3010 Micro – Edition 5 – 11 December ’00 - 3508
6
Follow these steps to get
your Diverse 3010 Micro
ready for use
Note
Plan where you will put your Diverse 3010
Micro. It should be within two metres of
a power socket and the phone socket.
Your handset is already
“registered” to the Diverse
3010 Micro base station.
1
Connect the power cable
Plug the power cable into the power
socket on the underside of your
Diverse 3010 Micro. The power cable
connector is coloured red. Please take
care that the telephone cord and
power cable plugs are connected to the
correct socket as incorrect placement
could damage the base station.
Red socket
2
Plug the 3 pin adaptor
into a mains power socket
and switch on
SETTING
UP
WARNING
It is recommended that the telephone line
cord is not connected until the handset is
fully charged. This will prevent the risk of
the phone being answered prior to the
batteries being fully charged and therefore
not achieving their optimum capacity.
Setting up
Diverse 3010 Micro u/g 22/3/01 12:26 pm Page 6
All manuals and user guides at all-guides.com
