2
On your hub
Press the
button (it’s half way up, on the
left-hand side).
On your Adapter
Within 1 minute of pressing the Hub
press
and hold the
button for 6 seconds (it’s on
the right-hand side).
The light on the front of the Adapter will flash
quickly during registration. Once registration
is complete, the light will show solid green.
Let’s set up your Digital Voice Adapter
1
Link the Digital Voice Adapter with your hub
For ease of linking, plug your Digital Voice Adapter into a power socket close to where your
BT Hub is. (So you can reach both
buttons easily). Once its linked, you can then move it to
wherever you want your home phone to be.
If you changed your base PIN on your Hub from the default 0000, you will need to change
it back temporarily, before you link your Digital Voice Adapter to your Hub. See how to access
the BT Smart Hub Manager on page 4.
First things first
Your Digital Voice Adapter is designed to
work with the latest BT Hub. It gives you the
freedom to keep using your existing home
phones when your service moves over to
Digital Voice.
Make sure you set up your new hub first and
keep it powered on, so that you can always
use your home phones.
You can set up your Adapter when you have a
steady blue light on the front of your hub.
If you have any problems setting up your
adapter, give it 5 minutes and then try again.
It could be that your hub is updating and
needs to finish that first.
Handy help online
Get help setting things up at
Pa
ir Device
W PS
PAIR
Tip
Once registered to your Smart Hub, your Digital Voice Adapter will remember its link,
even if you unplug it and move it elsewhere around your home.
You don’t need to use a main power socket, you can also plug the Digital Voice Adapter
into an extension cable.
