BT DECTfax, User Manual

Page: 10 / 48

8
Setting up
Follow these steps to get your DECTfax
ready to use
1
Pull the front cover towards you until it
clicks and holds itself open.
2
Press on the two green catches to release
the rear cover and tilt it backwards.
3
Without removing the clear securing band
and with the green end of the spool on the
left, place the ribbon roll into its housing
under the rear cover Push the right-hand
end of the spool against the spring and lower
the green end into place.
1 Installing the print ribbon and
smartcard
The print ribbon and the smartcard work
together, and the fax will not work without the
smartcard. The print ribbon prints onto paper
and the smartcard monitors how much ribbon
has been used.
Warning
Use only print ribbons that match the supplier’s
specifications. Using other types may result in
damage to the main machine and invalidate the
manufacturer’s warranty.
Documents printed by your machine may be read
from the used print ribbon. If certain documents are
to be kept confidential, you may want to remove the
print ribbon whenever the machine is unattended.
Print ribbons
To obtain new print ribbons call 0800 590009 .