BT DECT Repeater, User Manual, Page: 9 / 16

Using your BT DECT Repeater 9
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
Please note
Blind spots (where signal is weak)
can cause loss of signal. Avoiding
blind spots will reduce the risk of
losing a call.
1. Switch off the handset within the new reception range of the
Repeater but outside the reception range of the telephone base
station, and then switch it back on again.
2. To confirm the handset is working with the Repeater, press the
Talk button on the handset whilst next to the Repeater.
You should hear a dial tone. Look at the Repeater, the blue LED
should be flashing.
Your Repeater is now ready for use.
To de-register/reset the Repeater
You can de-register the Repeater and then register it to another
telephone base station if you wish to.
1. Switch the power to the Repeater off at the wall socket.
2. Press and hold the Setup button, then switch the power back on
keeping hold of the button for 5 seconds. The Repeater will now
be de-registered.