manualshive.com logo in svg

BT DECT Repeater, User Manual, Page: 11 / 16

Share
Download
BT DECT Repeater User Manual Download Page 11

Help

11

If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp

If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp

The Repeater will not register

•  Reset the Repeater as described on page 9.

Cannot make or receive calls when in the Repeater reception range

•  There is no power to the Repeater. Check that the Power adaptor cable is plugged into the Repeater, 

the power adaptor is plugged into the mains socket and the mains power is switched on.

•  Make sure there is at least 10 metres between Repeaters.
•  The Repeater is not registered. You will have to repeat the registration process again with the 

telephone base station concerned.

Call lost or audio becomes poor when moving from the telephone base station reception area to the 
Repeater reception area

•  You may be moving out of range of the telephone base station/Repeater areas, or are in a ‘blind spot’.  

Move towards the telephone base station or Repeater.

•  Some telephone base stations and handset combinations do not support call handover during 

conversation when moving from telephone base station to Repeater area.

Summary of Contents for DECT Repeater

















Reviews:

No comments