![background image](http://html.mh-extra.com/html/bt/dect-repeater/dect-repeater_user-manual_2824506005.webp)
Setting up
5
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
Automatic registration to the telephone base station
1. Before beginning registration, make sure that all unregistered
Repeaters are switched off.
2. Turn on the Repeater mode in the telephone base station that
you will be registering the Repeater to. This varies dependant on
the product, the instruction can be found in the User guide,
provided with the telephone base station.
3. Put the telephone base station into registration mode, this is
normally done by pressing and holding the Find button, but
again consult the User guide, provided with the base station.
4. Switch on the power to the Repeater at the wall socket and the
Repeater will register automatically. The LED on the Repeater
will toggle between Red and Blue, followed by a triple blue flash
to confirm that registration is complete. The LED will remain blue
to indicate that the registration is complete.
5. You can now safely disconnect the power and move the Repeater
to your selected location. The Repeater will remain registered to
the telephone base station.
If the LED continues to flash red, try
registering the Repeater again.
Summary of Contents for DECT Repeater
Page 1: ...User guide DECT Repeater ...
Page 15: ......