17
lnstalling The Top And Side Top Platforms
Piace the two Side Top Platforms on top of the Rails and align the holes aver the Side Top Metal Piece.
Using four Bolts, Washers, Spring Washers, attach the Side Top Platforms to the Side Top
Metal Piece and only hand tighten. Piace a Top Platform at the end of one of the Side Top Platforms and
attach using tour Bolts, Washers, Spring Washers and Nuts. Continue this process until all of the Top
and Side Top Platforms are attached to all of the Top and Side Top Metal Pieces.
(See Diagram 36, 37 and 38)
Check the alignment but do not tighten.
6
7
•••••••••••••••••••••
•••••
•••••
8
•••
• ••
••
••
•
•
4 •
•
•
(Diagram 36)
•
••
••
.
�.•
3 -�-
49
�!--•:;i-�-=----
-=-
=-=----------------�====-�==��------�------- --�
1 O
_./�------·
--
. . . . . . . . . . . . . . . . . .
--
2
1
------- -------
-______ ,.. .. ··--1
_... .. -
--··
I I
__ ....
.....
11
///
(Diagram 37)
'f 'fe
'f
!fii
o
11�1\
� � �
�-'. �-'-
t't\
@@ �
��
.
=
�
o
I
i1 ,\
o
'/
1--------------
111 1 111
I/
r-------------_
1, 2, 6 AND 7 SIDE TOP PLATFORM AS SHOWN IN DIAGRAM 35
3, 4, 5, 8, 9 AND 10 TOP PLATFORM AS SHOWN IN DIAGRAM 36
ASSEMBL Y OF THE VERTICAL SUPPORTS
Attach the Bottom Joint Protector to the Vertical Support
using the screws provided
(See diagram 39).
Line up all of
the screw holes of the vertical supports with the Top and
Bottom Metal Pieces. Fix the vertical support onta the Top
and Bottom Metal Pieces and hand screw into piace.
Continue this process around the pool until all of the Vertical
Supports are attached. Check and adjust the alignment of
the Vertical Supports to ensure that they are indeed vertical
and straight then go around the pool and tighten all screws
top and bottom.
(See diagram
40)
o
(Diagram 40)
o
·-----
18
