9
Pool Wall Side Frame Support Assembly
The Pool Wall Side Frame Support consists of a left and right frame connected by a stainless steel belt.
(See diagram 8)
(Diagram 8)
Outside of
Pool
Left Frame
Right Frame
Joint Protector
Stainless Steel Belt
------•t..::..=....:r=
================
t::::::::;,l==��=::::i
(Diagram 9)
1. Connect the side Side Bottom
Joint Protector to the top
of the Vertical Side Beam
Angled
Side
Beam
Horizontal Side
Beam
(Diagram 11)
3.
Connect the lower end of the
Angled Side Beam to the
Horizontal Side Beam
..., ______ ..
,,
Connect both
Side Bottom
Metal Piece A
and B to the
Horizontal
Side Beam
' ' '
r----------
Vertical
Side
Beam
,
,.. ....... "\� .............. ..
---
'
SIDEBOTTOM
METAL PIECE A
(Diagram1 O)
2.
Connect the Angled Side
Beam to the Vertical Side
Beam
4.
Connect the lower end of the
Vertical Side Beam to the
Horizontal Side Beam
POOL WALL SIDE FRAME SUPPORT ASSEMBLY
1. Connect the Steel Belt to either end of the Left and Right Side Pool Frames.
(See diagram 13 and 14)
Make sure the Steel Belt is protected by the PVC Sleeve which is provided in the package. This
will protect the Pool Liner from damage.
Left Frame
(Diagram 13)
POOL WALL RAIL AND RAIL CONNECTOR SETUP
Right Frame
(Diagram 14 )
1. Position the Left and Right Side Wall Frame in the middle of the prepared area
(See diagram 15)
2. Piace the Rails around the area where the pool wall is to be installed.
(See diagram 15)
3. Connect the Rails together using 2 Rail Connectors per Rail
(See diagram16 )
and leave a
1.5cm gap between each connection
(See diagram
17).
4. Connect the Side Rails to the Side Bottom Metal Piece A and B either side of the Pool Wall Frame Supports
(See diagram 18)
;:::::=======-=-=-=--=--=--=---=---=---=----=-----�- - - --
� -------;:::::========.;:;;:::::=,:;==;;=====�
�1.5cm�
(0.6")
- -
- -
(Diagram 16)
- -
(Diagram 17)
:::,�)'"-
"'
·····•., .............
... .
(Diagram 18)
10
