3
| www.bs-battery.com
EN
User manual and guide to professional battery
charging for Starter and Deep Cycle batteries
THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR BATTERY CHARGER & MAINTAINER: BS 30
Lithium (LiFePO4) & Lead Acid compatible
IMPORTANT SAFETY INSTRUCTIONS
Please read this manual and follow the instructions carefully before using the charger.
WARNING
•
The battery charger is designed to charge 12V Lead Acid batteries (LA) or Lithium (LiFePO4) (LFP) battery from 4Ah to 60Ah
and maintain batteries up to 120Ah.
•
We always recommend that you check the Battery Manufacturers specifications before using this charger.
•
Explosive gases may escape from the battery during charging. Provide ventilation to prevent flames and sparks.
•
For indoor use. Do not expose charger to rain, snow or liquids.
•
Battery acid is corrosive. Rinse immediately with water if acid comes into contact with skin or eyes.
•
Never charge a frozen battery.
•
Never charge a damaged battery.
•
Never place the charger on the battery while charging.
•
Be extra cautious to reduce risk of dropping a metal tool onto battery. It might spark or short-circuit battery or other electrical
part that may cause explosion.
•
When working with a Lead Acid battery, remove personal metal items such as rings, bracelets, necklaces, watches…
•
NEVER smoke or allow a spark or flame in vicinity of battery or engine.
•
Do not charge non-rechargeable batteries.
•
In order to reduce risk of electric shock, unplug charger from AC outlet before doing any.
•
maintenance or cleaning. Turn off controls will reduce risk.
•
The kit is not supposed to be used by children or by people who are not able to understand the manual, unless they are supervised
by a responsible person who ensures the proper use of the kit.
MAIN FEATURES
•
Auto Detect –
Auto-detect for Lead acid or LiFePO4 battery hooked.
•
Adaptable charging algorithm –
Enable the precise charging algorithm targeted for Lead acid or LiFePO4 batteries.
•
Smart re-activation –
Allows it to wake up “dead” LiFePO4 batteries where the BMS under-voltage protection has been triggered.
•
Battery qualification detection –
Automatically detect the battery initial voltage.
•
Low voltage Start –
Activate the heavy discharged low-voltage battery.
•
Battery bad cell detection –
Smart detection to the battery bad cells and error indication.
•
Weak or sulphated Battery detection –
Automatically detect the weak or heavy-sulphated battery and error indication.
•
Charging time management –
Multiple charging stages and charging time management.
•
Pulse maintenance –
Long term pulse mode maintenance to keep the Lead acid battery at optimal performance.
•
Flexible output cable –
Detachable clamps terminal cord sets with SEA connector.
•
Flexible hook
– Built with a hook for hanging up the unit in special locations.
PROTECTION FEATURES
•
Connection spark free.
•
Never overcharge your battery.
•
Output short circuit or reverse polarity protection.
•
Charging timer for each charge phase protection.
•
Thermal run-away protection at the battery side.
•
Internal over-heat protection.
•
Conformal coatings prevent from moisture for the inside circuit board.
•
Corrosion-resistant output connectors.
Summary of Contents for 700546
Page 27: ...www bs battery com...
