19
5.9.
Equipment Summary
The equipment summary screen will appear after accessories have been selected.
This screen will give a summary of all equipment automatically found or manually
selected. If an incorrect selection was made, touch
RE--INSTALL
to go back to
that particular screen and make changes. When everything is OK, touch
NEXT
to
continue.
A12502
5.10. Static Pressure Check
This function is not available with the 986T furnace.
The static pressure check screen will appear next. The system will perform a static
pressure check. This process will take about 1--1/2 minutes to complete. When
completed, a screen will appear displaying the static pressure (in inches) across the
equipment at the expected highest delivered airflow. If the blower RPM is greater
than 1200, then a warning will appear, but equipment operation and the
TrueSense
t
dirty filter detection operation will not be affected. When the static
pressure check is complete, touch
NEXT
.
NOTE
: The static pressure check occurs only at initial installation, or when
INSTALL
is run in the
INSTALL/SERVICE
menu.