Bryant 547J, Installation Instructions Manual

Page: 3 / 24

3
* Shipped in hardware kit for field installation.
HW = Honeywell
LEGEND
* Includes HH57AC081 sensor and wiring harness.
† Accessory CO
2
sensors.
** Accessory aspirator boxes required for duct-mounted applications.
†† CRCBDIOX005A00 is an accessory that contains both
33ZCSENCO2 and 33ZCASPCO2 accessories.
Accessories List
The EconoMi$er X system has several field-installed accessories
available to optimize performance. Refer to Table 6 for authorized
parts and power exhaust descriptions. Refer to Fig. 1 for shipping
and component locations.
* When available, or order MicroMetl PN 9901-2022-DIFF JC2.
Compliance
Economizers meet California Energy Commission Title 24
prescriptive section 140.4 (damper leakage etc.), and mandatory
section 120.2.i for Fault Detection and Diagnostic controls.
Economizers meet ASHRAE 90.1 damper leakage requirements
and meet Fault Detection and Diagnosis requirements.
Economizers meet IECC damper leakage and Fault Detection and
Diagnostic requirements.
IECC requires differential return air sensor, which must be ordered
separately. See Accessory CRDIFRASN01A00.
Outside air, and return air and relief air dampers are AMCA rated.
For 48/50LC 07-12 Instructions, see “Instructions for 48/50LC
07-12 Units Only” on page 9.
Fig. 1 — EconoMi$er
®
X Component Locations
(CRECOMZR067A01 Shown)
Table 4 — Package Contents
ECONOMIZER PART
NUMBER
QTY CONTENTS
CRECOMZR067A01,
CRECOMZR069A01
1
EconoMi$er Damper Assembly with
Actuator and HH79AH001 (HW:
C7250) Outside Air Sensor
1
HW63AW002 (HW: W7220) Controller
with Attached Harness*
1
HH79AH001 (HW: C7250) Mixed Air
Temp Sensor*
1
50HE403859 2-(green) wire harness
for mixed air temperature sensor*
1 48TMHSRSE--A20 4-Wire Harness*
1 Hood Assembly with Top and 2 Sides
1 Hood Divider
1 Aluminum Filter
1 Hardware Bag*
CRECOMZR071A01
1
EconoMi$er Damper Assembly with
Actuator and HH79AH001 (HW:
C7250) Outside Air Sensor
1
HW63AW002 (HW: W7220) Controller
with Attached Harness*
1
HH79AH001 (HW: C7250) Mixed Air
Temp Sensor*
1
50HE403859 2-(green) wire harness
for mixed air temperature sensor*
1 48TMHSRSE--A20 4-Wire Harness*
1 Hood Assembly with Top and 2 Sides
1 Hood Divider
1 Hood Filter Divider
2 Aluminum Filters
1 Hardware Bag*
Table 5 — EconoMi$er
®
X Sensor Usage
APPLICATION
ECONOMI$ER X WITH OUTDOOR AIR DRY
BULB SENSOR
Accessories Required
Outdoor Air Dry
Bulb
HH79AH001 outdoor air dry bulb sensor is factory
installed on economizer.
Mixed Air Sensor
HH79AH001 provided with economizer and field-
installed in blower compartment.
Single Enthalpy HH57AC081
Differential Dry
Bulb or Enthalpy
CRDIFRASN01A00* (When available, or
MicroMetl part number 9901-2022-DIFF JC2)
CO
2
for DCV
Control using a
Wall-Mounted
CO
2
Sensor
33ZCSENCO2
or
CGCDXSEN004A00
CO
2
for DCV
Control using a
Duct-Mounted
CO
2
Sensor
33ZCSENCO2 or
CGCDXSEN004A00†
and
33ZCSENCO2 or
CGCDXASP00100**
OR CRCBDIOX005A00††
DCV — Demand Controlled Ventilation
Table 6 — EconoMi$er ® X Field-Installed Accessories
DESCRIPTION PART NUMBER
208/230v 1PH Power Exhaust for Small
Cabinet
CRPWREXH030A01
460v 3PH Power Exhaust for Small
Cabinet
CRPWREXH021A01
208/230v 1PH Power Exhaust for Large
Cabinet
CRPWREXH022A01
460v 3PH Power Exhaust for Large
Cabinet
CRPWREXH023A01
208/230v 1PH Power Exhaust for Extra
Large Cabinet
CRPWREXH080A00
460v 3PH Power Exhaust for Extra
Large Cabinet
CRPWREXH081A01
Enthalpy Sensor (OA) Outdoor Air HH57AC081
Differential (Return) Sensor CRDIFRASN01A00*
CO
2
Sensor and Aspirator Box CRCBDIOX005A00
Return Air CO
2
Sensor (4 to 20 mA) CRCBDIOX002A00
CO
2
Room Sensor (4 to 20 mA)
33ZCSENCO2 or
CGCDXSEN004A00
Aspirator Box for Duct Mount
CO
2
Sensor (4 to 20 mA)
33ZCASPCO2 or
CGCDXASP001A00
Economizer Angle Seal Kit for use with
unit's with Hinged Filter Door - for
Small Cabinet
CRPECONV003A00
Economizer Angle Seal Kit for use with
unit's with Hinged Filter Door - for
Large Cabinet
CRPECONV004A00
Economizer Angle Seal Kit for use with
unit's with Hinged Filter Door - for
Extra Large Cabinet
CRPECONV007B00
Actuator
Economi$er X
Wiring Harness
HH79AH001
Outside Air
Temperature
Sensor
Barometer Relief
Dampers Outside
Air Damper
HH79AH001 Outside Air
Temperature Sensor
(In Shipping Position)