Brutus 61024BR, Owner'S Manual

Page: 8 / 48

– 6 –
FIGURE 4
FIGURE 5
B. MOTOR ASSEMBLY INSTALLATION
STEP 1:
Install the motor frame assembly into the
motor support arm (FIGURE 6).
STEP 2:
Pre-fix the red motor frame locking knob into
the hole provided, as shown. This knob is also used to
fine-tune the alignment of the motor frame assembly.
STEP 3:
Remove the rubber cap to expose hex nuts.
Firmly drive the three hex bolts into the motor support
arm with Allen key provided and secure the motor
frame locking knob .
STEP 4:
Place rubber cap back over hex nuts.
Motor
frame
locking
knob
Rubber
cap
Motor
support
arm
FIGURE 6
C. INSTALLING UPPER FRAME
WHEELS
Secure the 4 in. wheels at the two ends of the base
frame with hex bolts and nuts, as shown (FIGURE 7).
FIGURE 7
D. INSTALLING THE CORD
COLLECTING HANGER / TOOL CADDY
Secure the hanger onto the motor support arm with 2
bolts (FIGURE 8). Place 2 wrenches in hanger and place
Allen key in opening provided.
FIGURE 8