Brush Bandit 65A, Operating & Parts Manual

Page: 43 / 72

Bandit
PRINTED 4/02 PAGE 29
MODELS 65A & 65AW MAINTENANCE SECTION
MAINTENANCE SECTION
WHEN YOU CHANGE CHIPPER KNIVES
CHECK CHIPPER DISC ASSEMBLY FOR
ELONGATED KNIFE BOLT HOLES,
SECURE WELDS, TORQUED BOLTS,
EXCESSIVE WEAR AND IMPACT
CRACKS. IF A PROBLEM IS FOUND
CONTACT CHIPPER MANUFACTURER,
OR AUTHORIZED CHIPPER DEALER.
WARNING
LOCK OUT ALL ENERGY SOURCES
BEFORE SERVICING OR REMOVING
GUARDS OR HOODS!
DO NOT RESTART UNTIL ALL GUARDS
AND HOODS ARE SECURELY AND PROP-
ERLY REINSTALLED
1. Shut off engine/motor.
2. Disengage pto/clutch.
3. Wait for cutter disc/drum to come to
a COMPLETE STOP (takes at least
several minutes).
4. Install disc/drum lock pin.
5. Unplug engine disable plug.
6. Remove padlock from hood pin.
7. Press down and hold hood spring lock pin.
8. Retract hood pin.
DANGER