Brush Bandit 65A, Operating & Parts Manual

Page: 36 / 72

Bandit
PRINTED 4/02 PAGE 22
MODELS 65A & 65AW CONTROLS
CONTROLS
ADJUST PIVOT TENSION WITH THE
TIGHTNESS OF INSIDE FRICTION NUTS.
SECURE ADJUSTMENT WITH
OUTSIDE JAM NUTS.
ADJUSTING TENSION FOR CONTROL HANDLE PIVOT
AND LAST CHANCE CABLE PULL.
NORMAL WEAR REQUIRES PERIODICAL ADJUSTMENT OF PIVOT TENSION.
FEED CONTROL HANDLE SHOULD PIVOT WITH LITTLE EFFORT, BY HAND OR
WITH A PULL ON “LAST CHANCE” CABLE.
CORRECT OPERATION OF FEED CONTROL HANDLE
FOR ALL CHIPPERS DESIGNED
TO BE “HAND FED”.
IF YOU ARE IN THE AREA OF THE
INFEED HOPPER, ALWAYS BE
WITHIN EASY REACH OF AND
PREPARED TO OPERATE THE
FEED CONTROL HANDLE.
USE THE 1” JAM NUT TO ADJUST
CONTROL HANDLE PIVOT TENSION.
FEEDING
PUSH TO
REVERSE
FEEDING