PAGE 6
BRUNSWICK INSTALLATION MANUAL
APOLLO
BASEFRAME AND LEG ASSEMBLY
(CONTINUED)
FIGURE SEVEN
Step #7:
Measure the baseframe assembly diagonally
and adjust as required to obtain the same measurement
to assure the baseframe is square. Tighten all hardware
securely with all joints flush.
FIGURE SEVEN
FIGURE EIGHT
Step #8:
Position the baseframe and leg assembly in its
final location. Level the baseframe with your preferred
level by rotating the leg levelers. The levelers should be
rotated out atleast 1/4” to allow for further leveling when
the slate is attached.
NOTE:
Try to leave atleast 5’ between the outer edge
of the baseframe to any wall.
