manualshive.com logo in svg

Bruker SamplePro hr-MAS, User Manual, Page: 29 / 82

Share
Download
Bruker SamplePro hr-MAS User Manual Download Page 29

29

Z31914_00_01

Design and Function

5.4.3

The Door Lock

The SamplePro robotic system provides a door lock for safety.

The door locks when:

•

The door is closed and the barcode scanner scans the rotor containers for bar-
codes. After the scan the door is automatically unlocked.

•

A transfer to the MAS probe or a transfer back has been started within the control 
software SamplePro hr-MAS. After a transfer the door is automatically unlocked.

5.5

The SamplePro Exchange Unit

The SamplePro Exchange Unit (EU) was designed to transfer 4 mm MAS rotors from 
one end of a flexible hose to the other. An optional barcode reader can be supplied for 
reading barcodes on the rotors.

5.5.1

Exchange Unit Back Panel

1

2

3

4

5

6

7

8

PN H116431

 

SSN 0001

 

VA 00

 

ECL 00.00

1.

Vacuum Generator 
Exhaust

2.

Ventilation Valve

3.

Type Label

4.

Transfer Pressure 
Adjustment

5.

Gas Inlet 1

6.

Gas Inlet 2

7.

CAN Connector

8.

Power Supply 

 

Connector

Figure 5.4

Exchange Unit Back Panel

Summary of Contents for SamplePro hr-MAS



















































































Reviews:

No comments