manualshive.com logo in svg

Bruker BioSpin Solid State NMR, User Manual

Share
Download
Bruker BioSpin Solid State NMR User Manual Download Page 23

RF-Filters in the RF Pathway

User Manual Version 002

BRUKER BIOSPIN

23 (327)

Pleas

e

 note in 

Figure 3.7.

: Only high power preamps allow decoupling through

the preamp.

Figure 3.8. Triple Resonance Experiment, without X-Y Decoupling

Figure 3.8.

 is a triple resonance experiment, without X-Y decoupling (one band-

pass will suffice), note the preamp configuration. It is recommended not to put two
preamps of the same kind next to each other in order to avoid incorrect wiring of
probe and filters. For the X-channel, only the proton frequency needs to be filtered
out if X or Y is not decoupled while Y or X is observed (protons are usually decou-
pled).

Figure 3.9. Triple Resonance Experiment, with X-Y Decoupling

Figure 3.9.

 is a triple resonance experiment, with X-Y decoupling (two band pass-

es required! Care should be taken that the two bandpass filters mutually exclude
the other frequency as efficiently as possible. Low pass filters will not allow X or Y
observe while Y or X is decoupled!).

Summary of Contents for Solid State NMR









































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands