BRP Sea-Doo MOVE, Operator'S Manual

Page: 8 / 59

SPECIAL SAFETY MESSAGES
Important Warnings
Always perform the PRE-USE INSPEC-
TION
for safe driving.
Always follow guidelines in TOWING
THE TRAILER
.
Maintain your trailer as per the MAIN-
TENANCE SCHEDULE
.
Make sure to always secure trailer with
wheel blocks when not in use.
Important Information
Trailer
This BRP Sea-Doo MOVE™ trailer
has been specially designed to carry
a PWC.
Hitch
WARNING
The use of a hitch with an insuffi-
cient load rating can result in hitch
breakdown.
Be sure the hitch ball size matches the
coupler size.
Inspect the hitch for wear, corrosion
and cracks before coupling. Replace
the required components if any of the
above conditions is observed.
WARNING
Do not tow whenever a compo-
nent is defective.
NOTICE
The coupling socket
should not be allowed to rest on
the ground where dirt and sand can
enter the socket. This will lead to
excessive wear or cause the locking
mechanism to jam.
Ensure hitch is tight before coupling
the trailer to the vehicle.
WARNING
An improperly coupled trailer can
result in a loss of control or serious
road hazard. Never use the trailer
pre-use inspection is completed.
Tow Vehicle
Some vehicles are not intended to tow
a trailer. Make sure your vehicle is de-
signed to tow a trailer and its towing ca-
pacity is sufficient.
WARNING
Never tow this trailer with a vehi-
cle not intended for trailer towing
or with an insufficient towing ca-
pacity.
Accessories and Modifications
We recommend to use replacement
parts and accessories from BRP.
They’ve been especially designed for
your trailer and manufactured to meet
BRP’s demanding standards.
Do not make unauthorized modifica-
tions, or use accessories that are not
approved by BRP. Since these changes
have not been tested by BRP, they
may increase the risk of accidents or
injuries, and they can make the trailer
illegal for use.
6
________
SAFETY INFORMATION
________