BRP can-am RENEGADE 1000 2015 Operator'S Manual Download Page 65

Page: 65 / 156

CONTROLS

2) LH Brake Lever

The LH brake lever is located on the LH
side of the handlebar.

vmo2012-012-008_a

TYPICAL

1. Brake lever
2. To apply brakes

The LH brake lever function is to slow
down or stop the vehicle.

When the brake lever is pressed, the
rear brakes are applied.

Braking effect is proportional to the
force applied on the lever.

3) RH Brake Lever

The RH brake lever is located on the RH
side of the handlebar.

vmo2008-014-003_a

TYPICAL

1. Brake lever
2. To apply brakes

The RH brake lever function is to slow
down or stop the vehicle

When the brake lever is pressed, the
front brakes are applied.

When released, the brake lever should
automatically return to its original posi-
tion.

Braking effect is proportional to the
force applied on the lever.

4) Parking Brake

The parking brake is located on the LH
side of the handlebar.

The parking brake function is to apply
brake to rear wheels to prevent vehicle
from moving when parked.

WARNING

Always use the parking brake

and

engage the PARK position on the
shift lever when the vehicle is not
in operation.

To engage parking brake:

Squeeze

brake lever and maintain while moving
lever lock. Brake lever is now pressed
and applying rear brakes.

vmo2012-012-009_a

TYPICAL

1. Brake lever lock
2. Press to apply parking brakes

NOTE:

Locking lever can be adjusted

in several positions.

NOTICE

Ensure when the park-

ing brake is applied that the vehicle
stays securely in place.

_______________

Summary of Contents for can-am RENEGADE 1000 2015





























































































































































Search results

Summary of Contents for can-am RENEGADE 1000 2015

Reviews:

Related manuals for can-am RENEGADE 1000 2015

Brands by name

Popular brands

BRP can-am RENEGADE 1000 2015, Operator'S Manual

Search results

Summary of Contents for can-am RENEGADE 1000 2015

Reviews:

Related manuals for can-am RENEGADE 1000 2015

Brands by name

Popular brands